openEuler 社区

从系统调用返回到用户空间是否调度,从ret_with_reschedule可看出,是否真正调度,取决于当前进程的pcb中的need_resched是否设置为1,那如何设置为1取决于以下几种情况:

时间中断处理程序,发现当前进程运行时间过长:每次发生时间中断,都要递减该进程的时间片,一旦count为0,强制调度,剥夺当前进程运行

1. void update_process_times(int user_tick)
2. {
3. struct task_struct *p = current;
4. int cpu = smp_processor_id(), system = user_tick ^ 1;
6. update_one_process(p, user_tick, system, cpu);//统计信息而已
7. if (p->pid) {
8. if (--p->counter <= 0) {
9. p->counter = 0;
10. p->need_resched = 1;//强制调度
11. }
12. if (p->nice > 0)
13. kstat.per_cpu_nice[cpu] += user_tick;
14. else
15. kstat.per_cpu_user[cpu] += user_tick;
16. kstat.per_cpu_system[cpu] += system;
17. } else if (local_bh_count(cpu) || local_irq_count(cpu) > 1)
18. kstat.per_cpu_system[cpu] += system;
19. }

 如果此时在用户态发生中断，进入内核态，p->counter减为0，那么p->need_resched就置为1，中断返回时就会强制调度。

    如果此时发生系统调用，进入内核态，再发生中断，p->counter减为0，那么p->need_resched就置为1，中断返回后，然后系统调用返回时就会强制调度。

    如果此时在用户态发生异常，进入内核态，再发生中断，p->counter减为0，那么p->need_resched就置为1，中断返回后，然后异常返回时就会强制调度。

第二种情况

唤醒一个睡眠进程,发现被唤醒的进程比当前进程权值高,need_sched设置为1

2. /*
3. * Wake up a process. Put it on the run-queue if it's not
4. * already there. The "current" process is always on the
5. * run-queue (except when the actual re-schedule is in
6. * progress), and as such you're allowed to do the simpler
7. * "current->state = TASK_RUNNING" to mark yourself runnable
8. * without the overhead of this.
9. */
10. inline void wake_up_process(struct task_struct * p)
11. {
12. unsigned long flags;
14. /*
15. * We want the common case fall through straight, thus the goto.
16. */
17. spin_lock_irqsave(&runqueue_lock, flags);
18. p->state = TASK_RUNNING;//设置为可执行状态
19. if (task_on_runqueue(p))//如果已经到run队列
20. goto out;
21. add_to_runqueue(p);//加入run队列
22. reschedule_idle(p);//将唤醒进程与当前进程比较,如果唤醒进程比当前进程权值高,那就把当前进程的need_resched设置为1
23. out:
24. spin_unlock_irqrestore(&runqueue_lock, flags);
25. }

static void reschedule_idle(struct task_struct * p){ ...... int this_cpu = smp_processor_id(); struct task_struct *tsk; tsk = cpu_curr(this_cpu);//获取当前进程的task_struct数据结构 if (preemption_goodness(tsk, p, this_cpu) > 1)//比较当前进程和被唤醒的进程的综合权值 tsk->need_resched = 1;//如果被唤醒的进程的综合权值比当前进程的大，那么强制调度}

 对于第三种情况，实际上应被视为自愿的让出。但是，从内核代码的形式上看，也是通过相同的办法，将当前进程的need_resched标志置为1，使得在进程返回用户空间前夕发生调度，所以也放在这一节。此类系统调用有两个，一个是sched_setscheduler()，另一个是sched_yield()。

    系统调用sched_setscheduler()的作用是改变进程的调度政策。用户登录到系统后，第一个进程的适用调度政策为SCHED_OTHER，也就是默认为无实时要求的交互式应用。在fork()创建新进程时则将此进程适用的调度政策遗传给了子进程。但是，用户可以通过系统调用sched_setscheduler()改变其适用调度政策。

sched_setscheduler，内核态对应的代码如下：

asmlinkage long sys_sched_setscheduler(pid_t pid, int policy, struct sched_param *param){ return setscheduler(pid, policy, param);}asmlinkage long sys_sched_setparam(pid_t pid, struct sched_param *param){ return setscheduler(pid, -1, param);}

static int setscheduler(pid_t pid, int policy, struct sched_param *param){ struct sched_param lp; struct task_struct *p; int retval; retval = -EINVAL; if (!param || pid < 0) goto out_nounlock; retval = -EFAULT; if (copy_from_user(&lp, param, sizeof(struct sched_param)))//从用户空间把sched_param结构拷贝到lp goto out_nounlock; /* * We play safe to avoid deadlocks. */ read_lock_irq(&tasklist_lock); spin_lock(&runqueue_lock); p = find_process_by_pid(pid);//通过pid找到task_struct retval = -ESRCH; if (!p) goto out_unlock; if (policy < 0)//policy为-1 policy = p->policy;//维持原来的政策 else { retval = -EINVAL; if (policy != SCHED_FIFO && policy != SCHED_RR && policy != SCHED_OTHER)//必须是这三种政策之一 goto out_unlock; } /* * Valid priorities for SCHED_FIFO and SCHED_RR are 1..99, valid * priority for SCHED_OTHER is 0. */ retval = -EINVAL; if (lp.sched_priority < 0 || lp.sched_priority > 99)//实时进程的priority必须处于0-99 goto out_unlock; if ((policy == SCHED_OTHER) != (lp.sched_priority == 0))//如果政策是SCHED_OTHER，sched_priority必须是0 goto out_unlock; retval = -EPERM; if ((policy == SCHED_FIFO || policy == SCHED_RR) && !capable(CAP_SYS_NICE)) goto out_unlock; if ((current->euid != p->euid) && (current->euid != p->uid) && !capable(CAP_SYS_NICE)) goto out_unlock; retval = 0; p->policy = policy; p->rt_priority = lp.sched_priority; if (task_on_runqueue(p)) move_first_runqueue(p);//从可执行进程队列的当前位置移到队列的前部，使其在调度时处于较为有利的地位 current->need_resched = 1;//强制调度out_unlock: spin_unlock(&runqueue_lock); read_unlock_irq(&tasklist_lock);out_nounlock: return retval;}

  另一个系统调用sched_yield()，使运行中的进程可以为其他进程"让路"，但并不进入睡眠。内核的实现sys_sched_yield，代码如下：

asmlinkage long sys_sched_yield(void){ /* * Trick. sched_yield() first counts the number of truly * 'pending' runnable processes, then returns if it's * only the current processes. (This test does not have * to be atomic.) In threaded applications this optimization * gets triggered quite often. */ int nr_pending = nr_running;#if CONFIG_SMP int i; // Substract non-idle processes running on other CPUs. for (i = 0; i < smp_num_cpus; i++) if (aligned_data[i].schedule_data.curr != idle_task(i)) nr_pending--;#else // on UP this process is on the runqueue as well nr_pending--;#endif if (nr_pending) {//正在等待的运行的进程数 /* * This process can only be rescheduled by us, * so this is safe without any locking. */ if (current->policy == SCHED_OTHER)//当前进程调度策略为sched_other current->policy |= SCHED_YIELD;//SCHED_YIELD标志位置1，在_schedule_tail清0 current->need_resched = 1;//强制调度 } return 0;}

来自为知笔记(Wiz)